Mechanical Edge of Dock Leveler Series

Hydraulic Lift

Features

  • Heavy-duty bumper blocks complete with molded rubber bumpers
  • Grease fittings
  • Rated capacities 20,000 or 25,000 lb

Description

Pentalift "Pentalever" Mechanical Edge of Dock levelers are built for a rugged service life in demanding applications. "Easy-lift" activation reduces the manual effort required to position the edge of dock leveler. A torsion spring assembly provides operator assistance when cycling the edge of dock. The activating lever stores safely out of the way at the side of the deck, and is not prone to loss or theft. The "Pentalever" Edge of Dock is a safe and economical alternative to conventional dock levelers. The design ensures trouble-free operation and a maximum return on investment. Lip hinge grease fittings are installed for ease of maintenance. The activating lever stores safely out of the way and is not prone to loss or theft. The operator lifts the activating lever straight up until it contacts the retaining bolt. In one simple motion, the lever is pulled back until the lip extension latch engages. The operator then pushes the handle forward to position the lip and deck assembly onto the bed of the truck/trailer. After the truck departs, the edge of dock automatically returns to the stored position.

Options:

  • 2" high roll-off stop lip plate design
  • Pour-in-place design

Specifications

Pentalever Mechanical Edge of Dock leveler shall be model _____________, as manufactured by Pentalift Equipment Corporation. Unit(s) shall be lever operated and torsion spring assisted. Leveler to have a deck width of _______". The rated capacity shall be _________ lb. Lip shall extend 11 1/2" beyond bumpers. Leveler can be operated to allow for the return of deck and lip to stored position without the need to move the truck from the dock. Leveler shall automatically restore when truck departs. When not in use, the operating lever will store safely to the side of the bumper, eliminating the potential for loss or theft. Bumpers shall be molded rubber mounted on heavy duty steel bumper blocks to achieve an overall projection of 16". Unit to have Pentalift gray finish.

Model Selection Chart

Model Span Width Capacity
EDML6620 27-1/2" 66" 20000 lb.
EDML6625 27-1/2" 66" 25000 lb.
EDML7220 27-1/2" 72" 20000 lb.
EDML7225 27-1/2" 72" 25000 lb.

Listed below are the brochures and technical documents for this product:

Brochure | Specific Brochure Page |Spec Sheet

Brochure Files are in Adobe Acrobat PDF format. If you do not have Adobe Acrobat, click here to download a free copy from the Adobe site.