Stationary Elevating Dock

Hydraulic Lift

Features

  • Exclusive PentaFLOW bypass cylinders
  • Free-fall protection
  • Lubricated for life bearings
  • Solid steel, one piece construction scissor legs
  • Heavy-Duty torque tubes
  • Hydraulic junction block
  • Structural angle base frame
  • Dual leg rollers (bottom)
  • Tracked leg rollers
  • Integral maintenance stand

Description

Pit installed units allow ground level access for all ranges of material handling equipment without the need for ramps. Vertical travel of 59" accomodates virtually all truck/trailer bed heights. Breaking down pallets of product can be eliminated, thereby dramatically increasing efficiency and safety. The potential of product damage is also reduced. Pit mounted elevating docks are available in sizes and capacities to suit the most demanding applications.

Options:

  • safety trip bars
  • larger lip sizes
  • aluminum lip
  • split lip
  • power units with increased hp for faster lift times
  • lip lift assist spring
  • automatic hydraulic roll off Stop
  • up travel limit switch
  • other options available

Note

Some photos may reflect products with optional features. All Pentalift Equipment products are subject to design improvements through modification without notice.

Specifications

Hydraulic Elevating Dock Model No. _______________ as manufactured by Pentalift Equipment Corporation. Elevating dock to have a platform size of _____" wide x_____" long, built of 4-way safety tread plate with 8" bevel toe guards. The unit shall have a lifting capacity of_____ lb., vertical travel of 59" and a lowered height of _____". An 18" x 60" one piece, high tensile steel bridge plate is to be provided on the rolling end. The hydraulic lift cylinder(s) shall be PentaFLOW style, equipped with an automatic bypass system at the top of cylinder stroke. A hydraulic velocity fuse shall be incorporated to prevent platform free-fall in the event a hydraulic hose is accidentally severed. All pivot points to have chromed pins and "lubricated for life" bearings. Unit to have two removable guardrails 42" high with midrails and 4" high kick plates. An integral maintenance stand shall be provided for safety during servicing. Controls shall be NEMA 4X pendant type push-button. The power unit is to be remote mounted and consist of a totally enclosed motor with integral hydraulic fluid reservoir. The motor shall be equipped with NEMA 12 pre-wired enclosure. Power supply to be _____/_____/_____. The elevating dock shall be shipped complete with hydraulic fluid. Unit to have Pentalift gray finish.

Model Selection Chart

Model # Deck Size VERTICAL
TRAVEL
(inches)		 CAPACITY
RANGE(LB)
(see notes #1)		 LOW
HEIGHT(in)
(see note #2)
HED 47_ 48 in x 84 in 50" 3000-20000 lb 12"
HED 48_ 48 in x 96 in 59" 3000-20000 lb 12"
HED 49_ 48 in x 108 in 59" 3000-20000 lb 12"
HED 410_ 48 in x 120 in 59" 3000-20000 lb 12"
HED 57_ 60 in x 84 in 50" 3000-25000 lb 12"
HED 58_ 60 in x 96 in 59" 3000-25000 lb 12"
HED 59_ 60 in x 108 in 59" 3000-25000 lb 12"
HED 510_ 60 in x 120 in 59" 3000-25000 lb 12"
HED 68_ 72 in x 96 in 59" 3000-25000 lb 12"
HED 69_ 72 in x 108 in 59" 3000-25000 lb 12"
HED 610_ 72 in x 120 in 59" 3000-25000 lb 12"
HED 612_ 72 in x 144 in 59" 3000-25000 lb 12"
HED 78_ 84 in x 96 in 59" 3000-25000 lb 12"
HED 79_ 84 in x 108 in 59" 3000-25000 lb 12"
HED 710_ 84 in x 120 in 59" 3000-25000 lb 12"
HED 712_ 84 in x 144 in 59" 3000-25000 lb 12"
HED 88_ 96 in x 96 in 59" 3000-25000 lb 12"
HED 89_ 96 in x 108 in 59" 3000-25000 lb 12"
HED 810_ 96 in x 120 in 59" 3000-25000 lb 12"
HED 812_ 96 in x 144 in 59" 3000-25000 lb 12"

Listed below are the brochures and technical documents for this product:

Full Brochure

Brochure Files are in Adobe Acrobat PDF format. If you do not have Adobe Acrobat, click here to download a free copy from the Adobe site.